• 联系人:宋经理
  • 电 话:0531-85719180
  • 手 机:15254118966
  • 地 址:山东省济南市天桥区北园大街217号

公司新闻

当前位置:首页 > 巨康学术 > 公司新闻

清洗净化铝材配件-胶盒油渍的具体方法

发布人:
发布日期:2017-04-13 17:48:23
洁净室胶盒的清洗越来越被人们所重视,在现代高科技年代,高科技产品的生产制造离不开洁净室,生产时盛装这些精密产品的零部件就更离不开洁净胶盒,这些胶盒根据各公司规模不同,每月使用量从几千套到几十万套不等,然而有些公司不知如何清洗再利用而将它们丢弃,第一造成高包装成本,第二废料处理带来环境问题。
 
Cleaning clean room plastic box is more and more valued by people, in the modern age of high-tech and high-tech products production manufacturing is inseparable from the cleanroom, production containing parts of these sophisticated products more inseparable from the clean plastic box, these plastic box depending on the size of the company, the monthly usage to hundreds of thousands of sets of ranging from several thousand sets, however some companies do not know how to clean the reuse and discard them, the first cause high cost of packaging, the second waste treatment brought about environmental problems.
 
这几年来,很多公司已开始将胶盒循环清洗后在使用,因为经专业洗后的胶盒与新胶盒在使用上没有差别,不仅节省生产包装成本,而且节约原料资源及更好的保护了环境。
 
Over the last few years, many companies have begun to use the plastic box after washing, because the professional wash after the plastic box and the use of the new plastic box is not different, not only save the cost of production and packaging, but also save the raw material resources and better protect the environment.
 
对于专业胶盒清洗公司来说,最希望清洗的胶盒是干净无污的新胶盒,而周转胶盒特别是在拉周转胶盒的清洗往往是“令人痛苦”的。因为有些在拉周转胶盒会因各种意图而贴上胶纸、染上笔印,或沾上机油和润滑油等,直接导致的后果就是胶盒上常常残留有笔迹、胶渍及油印,这些胶渍及油印太过微观、污染部位随机,以致难以发现、难以清除。清洗这些胶盒不仅耗费的工时多,而且清洗后的品质较难保证,因而成为清洗公司一块“难啃的骨头”。
 
For professional plastic box cleaning company, the most want to clean the plastic box is clean and no pollution of the new plastic box, and the turnover of plastic boxes, especially in the case of the pull turnover plastic box is often a "painful". Because some pull plastic turnover box would for all intents and stick adhesive tape, pen printing dye, or stained with oil and lubricating oil etc., led directly to the consequence is plastic box often residual handwriting, glue stains and mimeograph, the glue stains and mimeograph too micro, contaminated parts of the randomized, so that it is hard to find, difficult to remove. Wash these plastic boxes not only spent more hours, but also the quality of the more difficult to ensure, and thus become a cleaning company a hard nut to bite".
 
不久前,有个客户的胶盒在我们公司清洗后,客户抽检时发现工件部位上的油印没洗干净。 到客户现场了解情况时,发现这种胶盒是黑色防静电胶盒,块头较大,在其工件部位上有不易发现的润滑油印,须在充足的光线下倾斜至一定角度才可发现。因为客户事先并无对来料状况作特殊说明,在来料检查时也未发现此种不良,所以清洗时并未做特殊处理,仅按正常来料清洗流程清洗。结果导致整批货全部被退回返工。
 
Not long ago, a client of the plastic box in our company after cleaning and sampling of customers find mimeograph workpiece position did not wash clean. To the customers at the scene and found the glue box is black anti-static plastic box, bigger, on the site of the workpiece is not easily found in the lubrication mimeograph, shall be in sufficient light inclined to a certain angle can be found. Because the customer has no prior to the special description of the material, in the incoming inspection also found that such a bad, so do not do special treatment, only according to the normal cleaning process. The results lead to the whole lot of the goods were returned to the rework.
 
对被退回的胶盒重新检查时,发现80~90%的胶盒都有油印,严重的几乎每处工件位上都有,且胶盒面积大,数量多,又是ESD材质,用正常的IPA加抹布擦拭方法行不通。一是进展太慢,客户要货急;二是IPA对ESD涂层会有腐蚀作用。经过反复清洗试验,终于找出了解决方法,就是将中性清洗剂MP、碱性清洗剂BC和水按适当比例混合后配成新溶剂,将有油胶盒放入其中进行短时间浸泡后用专用刷刷洗片刻,再用DI水冲淋,最后进入正常清洗工序清洗,清洗之后的胶盒经OQC检查后OK,油印被清除。
 
Of returned plastic box to check and found that 80-90% of the plastic box has a mimeograph, serious almost every workpiece position is, and plastic box area big, quantity and ESD material, with normal IPA and rag wipe doesn't work. One is that progress is too slow, customers want to rush; two is IPA on the ESD coating will have a corrosive effect. After repeated cleaning test, finally find out solutions, is the neutral cleaning agent MP, alkaline cleaning agent BC and water in certain proportion are mixed with new solvent, there will be oil, plastic boxes into the soaking time is short after use special cleaning brush for a moment, then DI water shower, finally entered the normal cleaning process cleaning, after cleaning the plastic box by OQC check OK, mimeograph is cleared.
净化铝材配件 http://www.jnjkjh.com/